More Online Utilities [DB2 9 for z/OS]

Today we continue our investigation into the new functionality in DB2 9 for z/OS... and specifically into the improvements made to IBM utilities for version 9. We will turn our attention to improved availability with IBM DB2 utilities. Under DB2 V9, three more utilities can run online – that is, with SHRLEVEL CHANGE.

First up we have CHECK DATA. This utility is executed when you want to make sure that the data in your tables matches your integrity constraints. Prior to V9, access to tables (or table spaces) is read only when CHECK DATA is being run. This means that as long as CHECK DATA is executing you cannot modify data. If you have complex referential sets and/or very large databases you likely will have issues with running CHECK DATA.

You can run CHECK DATA online – that means with SHRLEVEL CHANGE – as of DB2 V9. As with other online utilities, an online CHECK DATA will work with on a shadow copy of the data and indexes. DB2 makes the shadow copy using DFSMS ADRDSSU. This copy can be super fast if you have data set level FlashCopy V2 enabled. Even if you do not have FlashCopy availability will improve because the outage is reduced when you use SHRLEVEL CHANGE (just to make the copy) instead of SHRLEVEL REFERENCE (for the entire utility execution).

DB2 will check data integrity using the shadow copies of the data and indexes. When violations are found DB2 will not set the CHECK pending state. And remember, we are checking shadows, so DB2 will not delete rows in violation. Instead, CHECK DATA will create a PUNCHDDN containing REPAIR LOCATE DELETE input that can be run against the active data.

The CHECK LOB utility has also been enhanced to enable online execution. DB2 V9 allows SHRLEVEL CHANGE for checking LOBs using a shadow copy of the LOB table space. And just like CHECK DATA, DB2 uses the DFSMS ADRDSSU utility to create the shadow. And similarly, the check is executed against the shadow and REPAIR statements are generated that you subsequently can run against the actual LOB table space.

Finally, you can also run the REPAIR LOCATE utility specifying SHRLEVEL CHANGE. This enhancements allows us to execute the REPAIR utility online with LOCATE against indexes, index spaces and table spaces.

Histogram Statistics [DB2 9 for z/OS]

Another utility upgrade that has found its way into DB2 9 for z/OS is the ability to gather histogram statistics. This feature is already available in DB2 for Linux, Unix, and Windows… and after you migrate to DB2 V9 it will be available to you on z/OS.

What is it? Well, let’s first define what a histogram is for those of you who are not statistics experts. A histogram is a way of summarizing data that is measured on an interval scale. A histogram is particularly helpful to quickly highlight how data is distributed; to determine if data is symmetrical or skewed; and to indicate whether or not outliers exists.

The histogram is only appropriate for variables whose values are numerical and measured on an interval scale. It is generally used when dealing with large data sets. Histogram statistics can be quite useful to the optimizer for certain types of queries.

Instead of the frequency statistics, which are collected for only a subset of the data, sometimes DB2 can improve access path selection by estimating predicate selectivity from histogram statistics, which are collected over all values in a table space.

Consider collecting histogram statistics to improve access paths for troublesome queries with RANGE, LIKE, and BETWEEN predicates. They can also help in some cases for =, IS NULL, IN LIST and COL op COL predicates.

How to Collect Histogram Statistics

IBM RUNSTATS in DB2 V9 can collect statistics by quantiles. DB2 allows up to 100 quantiles. The user can specify how many quantiles DB2 is to use from 1 to 100. Of course, avoid 1 because it will not help.

You can tell RUNSTATS to collect histogram statistics by coding the HISTOGRAM keyword in conjunction with the COLGROUP option. In this way you can collect histogram statistics for a group of columns. You must also tell DB2 the number of quantiles to collect by specifying the NUMQUANTILES parameter. NUMQUANTILES can also be specified with the INDEX parameter, in which can it indicates that histogram statistics are to be collected for the columns of the index.

A single value can never broken into more than one interval. This means that the maximum number of intervals is equal to the number of distinct column values. Therefore, be sure that you do not specify a value for NUMQUANTILES that is greater than the total number of distinct values for the column (or column group) specified. Also, keep in mind that any NULLs will occupy a single interval.

So then, how do you decide on the number of quantiles to collect? If you do not specify NUMQUANTILES, the default value of 100 will be used, and then based on the number of records in the table, the number will be readjusted to an optimal number. Therefore, unless you have a good understanding of the application or a viable reason to deviate, a good rule of thumb is to simply let the NUMQUANTILES default and let DB2 work it out.

RUNSTATS will produce an equal-depth histogram. This means that each interval will have about the same number of rows. Please note that this does not mean the same number of values – it is the same number of rows. This means that in some cases a highly frequent single value could potentially occupy an interval all by itself.

The histogram statistics are collected in three new columns: QUANTILENO, LOWVALUE, and HIGHVALUE. These columns can be found in the following six DB2 Catalog tables:

• SYSIBM.SYSCOLDIST
• SYSIBM.SYSKEYTGTDIST
• SYSIBM.SYSCOLDIST_HIST
• SYSIBM.SYSCOLDISTSTATS
• SYSIBM.SYSKEYTGTDIST_HIST
• SYSIBM.SYSKEYTGTDISTSTATS.
  

Here is an example of a RUNSTATS to gather histogram statistics for the key columns of the indexes.:

RUNSTATS TABLESPACE DB07.CSMTS02
INDEX ALL
HISTOGRAM NUMCOLS 2 NUMQUANTILES 10
SHRLEVEL(CHANGE)
UPDATE ALL
REPORT YES

Summary

Histogram statistics is a very powerful new capability of the RUNSTATS utility that can be used to gather distribution statistics across all data values. These statistics can be helpful when you need additional distribution data to enable the optimizer to arrive at a better access path for certain queries/predicates.

COPY Improvements [DB2 9 for z/OS]

Next up in this sub-series on IBM utility improvements in the larger series on DB2 V9 features and functions we will take a look at the new “stuff” in the IBM COPY utility.

Copying Just the Pending Database Objects

The first nice new feature is a new parameter that can be used to make backup copies of only those database objects in a copy pending state. The new parameter is called SCOPE PENDING, and when you specify it the IBM COPY utility will only copy objects in copy pending or informational copy pending state.

The default is SCOPE ALL, which makes COPY act like it always acted; that is, without regard to the pending state.

This option can be used in conjunction with LISTDEF to build very powerful, selective backup jobs.

Copying Clone Tables

The IBM COPY utility also has been extended to support copying clone tables. If you are not sure what they are, follow the link to the blog entry in this series that covers that topic.

Anyway, the new CLONE parameter must be coded on the COPY specification in order for clone table and index data to be copied. It is important to understand that the CLONE parameter is basically an on/off toggle. If CLONE is coded, then COPY will copy only clone table (and/or index) data. You can specify both clone and regular database objects in the same COPY specification, but the IBM COPY utility will ignore non-clone objects when the CLONE parameter is specified; and it will ignore clone objects if the CLONE parameter is not specified.

CHECKPAGE

The CHECKPAGE parameter is not new to V9, but it is improved. Specifying CHECKPAGE indicates that the COPY utility should check each page in the table space or index for validity. If it finds an error, COPY issues a message that describes the type of error. Using CHECKPAGE is a good idea because it will identify problems in your page sets.

In previous releases of DB2, using CHECKPAGE with COPY was problematic because of high overhead and availability issues. In the DB2 9 for z/OS Technical Overview redbook, IBM reports that the CPU overhead is about 5 percent for COPY INDEX and 14 percent for COPY TABLESPACE if you are running V8. As for the availability issue, as soon as a validity problem is found on a page, the COPY utility will place the page set into COPY PENDING so it cannot be accessed while COPY chugs merrily along looking for additional invalid pages.

Both problems are addressed in DB2 9 for z/OS: IBM has significantly reduced the CPU overhead and fixed the availability issue. Instead of putting the page set into COPY PENDING immediately when it finds a problem, instead COPY will produce the message that it found a problem, but it will not set the pending state. Furthermore, it will continue checking pages but not copying anything.

Upon completion, COPY will issue a return code of 8 and it will update the SYSIBM.SYSCOPY catalog table indicating it found a broken page. This information is recording in a new column, TTYPE, with a value of “B”). This is important to understand because the page set will not be in a COPY PENDING state so you will have to check for the return code and fix the problem.

MODIFY RECOVERY [DB2 9 for z/OS]

Another IBM DB2 utility that has received some attention under Version 9 is MODIFY RECOVERY. For those not sure what this utility is, MODIFY RECOVERY is used to remove records from the SYSIBM.SYSCOPY table in the DB2 Catalog, along with related log records from the SYSIBM.SYSLGRNX directory table and related information from the DBD.

Before the new V9 changed, when you ran MODIFY RECOVERY you had to specify the deletion criteria in one of two ways:

• Given a specific date, delete all recovery information before that data
• Or given an age in days, delete all recovery information older than the age

But as of V9 we can alternately specify what is to be retained instead of what is to be deleted. This way, we tell the utility what we want to keep and it will remove the rest.

So, instead of coding the DELETE parameter (with a DATE or AGE) we would instead code a RETAIN parameter. The RETAIN parameter can specify one of five different options:

LAST (integer) – Using this option informs DB2 to choose a date such that the number of full image copies kept is not less than the integer specified. So, if we specify LAST(5), then we will delete all entries that exist prior to the date on which the fifth oldest copy was taken. If more than one copy was taken on that date the result could be that more than 5 copies are retained.

LOGLIMIT – Specifying this option will delete all copies where DB2 no longer has log records to recover forward from. DB2 uses the BSDS to establish the oldest archive log timestamp.

GDGLIMIT – You can use this option to enable the number of copies to be retained to be linked to the corresponding GDG base limit.

GDGLIMIT LAST (integer) – It is possible also to combine the GDGLIMIT and LAST options. DB2 will then use the GDG base limit, if the last primary copy is a GDG, if not it uses the integer specified.

GDGLIMIT LOGLIMIT – And finally, we can combine the GDGLIMIT and LOGLIMIT options, too. If the most recent primary full copy is a GDG then the GDG limit is used. If the last copy is not a GDG then the BSDS is used to determine the date prior to which deletions will occur.

The last two options (the ones that combine two parameters) are particularly useful if you have a mix of GDGs and non-GDGs for your image copies. They are also helpful if you use the LISTDEF option when you make image copy backups.

It is important to understand that for all these options MODIFY RECOVERY will cause DB2 to determine the most recent date that satisfies the retention requirement. After ascertaining the correct date to use, all entries before that data will be deleted. In effect DB2 chooses the most recent date that would satisfy the retention criteria. So, under some circumstances there may be more than one image copy on the specific date that is established, and therefore DB2 will keep those additional copies, too.

As an example, say we take 7 image copies on a single day. Then we run MODIFY RECOVERY … RETAIN LAST (3). In this case, all 7 will be retained as they were made on the same day, even though we indicated that we wanted to retain only the last 3.

Finally, there is one more significant change made to the MODIFY RECOVERY utility. Prior to V9, information was only deleted when copies were removed from SYSIBM.SYSCOPY. But as of V9, MODIFY RECOVERY will deletes SYSIBM.SYSLGRNX entries even if no SYSIBM.SYSCOPY records are deleted.

Why is this important? Well, some shops have migrated over to running BACKUP SYSTEM instead of individual image copies. In this case, there will be no individual image copies to remove in SYSIBM.SYSCOPY, but the SYSIBM.SYSLGRNX records will continue to grow. After migrating to V9 you can use MODIFY RECOVERY to trim the size of SYSIBM.SYSLGRNX which can improve performance for processes that need to access log range information.

TEMPLATE Switching [DB2 9 for z/OS]

Next up in this on-going series covering the new features and functionality of DB2 9 for z/OS we will tackle the improvements that have been made to the IBM DB2 utilities.

A nice new feature that impacts multiple utilities is TEMPLATE switching. For those not familiar with templating, TEMPLATE is a utility control statement that enables the allocation of data sets for a LISTDEF (LISTDEF is the way you control the list of database objects for a utility execution). With the TEMPLATE statement you essentially specify data set naming conventions and allocation information without using JCL DD statements.

OK, so what is TEMPLATE switching? What it enables you to do is to specify different characteristics for image copies of varying sizes. So, for example, you can create a different template for low and high volume image copies. Here is an example:

//SYSIN DD *
TEMPLATE low DSN &DB..&TS..IC.D&DA..T&TI.
  UNIT=DASD LIMIT(50 CYL,high)

TEMPLATE high DSN &DB..&TS..IC.D&DA..T&TI.

   UNIT=TAPE

COPY TABLESPACE MY.SMALLTS COPYDDN(low)

COPY TABLESPACE MY.LARGETS COPYDDN(low)

Note the new parameter named LIMIT. This is what controls when the TEMPLATE is switched. In this example we set the LIMIT for low volume at 50 cylinders. When this is reached the TEMPLATE will be switched to the high volume template. Of course, you have the flexibility to control the limit by specifying whatever number is appropriate for your site as well as specifying it in CYL, GB, or MB.

It is important to understand that DB2 can only switch the TEMPLATE once, so you cannot have more than two templates.

Template switching is available for image copies produced by COPY, COPYTOCOPY, MERGECOPY, LOAD, and REORG. And you can set up template switching for both the COPYDDN and RECOVERYDDN.