MODIFY RECOVERY [DB2 9 for z/OS]

Another IBM DB2 utility that has received some attention under Version 9 is MODIFY RECOVERY. For those not sure what this utility is, MODIFY RECOVERY is used to remove records from the SYSIBM.SYSCOPY table in the DB2 Catalog, along with related log records from the SYSIBM.SYSLGRNX directory table and related information from the DBD.

Before the new V9 changed, when you ran MODIFY RECOVERY you had to specify the deletion criteria in one of two ways:

• Given a specific date, delete all recovery information before that data
• Or given an age in days, delete all recovery information older than the age

But as of V9 we can alternately specify what is to be retained instead of what is to be deleted. This way, we tell the utility what we want to keep and it will remove the rest.

So, instead of coding the DELETE parameter (with a DATE or AGE) we would instead code a RETAIN parameter. The RETAIN parameter can specify one of five different options:

LAST (integer) – Using this option informs DB2 to choose a date such that the number of full image copies kept is not less than the integer specified. So, if we specify LAST(5), then we will delete all entries that exist prior to the date on which the fifth oldest copy was taken. If more than one copy was taken on that date the result could be that more than 5 copies are retained.

LOGLIMIT – Specifying this option will delete all copies where DB2 no longer has log records to recover forward from. DB2 uses the BSDS to establish the oldest archive log timestamp.

GDGLIMIT – You can use this option to enable the number of copies to be retained to be linked to the corresponding GDG base limit.

GDGLIMIT LAST (integer) – It is possible also to combine the GDGLIMIT and LAST options. DB2 will then use the GDG base limit, if the last primary copy is a GDG, if not it uses the integer specified.

GDGLIMIT LOGLIMIT – And finally, we can combine the GDGLIMIT and LOGLIMIT options, too. If the most recent primary full copy is a GDG then the GDG limit is used. If the last copy is not a GDG then the BSDS is used to determine the date prior to which deletions will occur.

The last two options (the ones that combine two parameters) are particularly useful if you have a mix of GDGs and non-GDGs for your image copies. They are also helpful if you use the LISTDEF option when you make image copy backups.

It is important to understand that for all these options MODIFY RECOVERY will cause DB2 to determine the most recent date that satisfies the retention requirement. After ascertaining the correct date to use, all entries before that data will be deleted. In effect DB2 chooses the most recent date that would satisfy the retention criteria. So, under some circumstances there may be more than one image copy on the specific date that is established, and therefore DB2 will keep those additional copies, too.

As an example, say we take 7 image copies on a single day. Then we run MODIFY RECOVERY … RETAIN LAST (3). In this case, all 7 will be retained as they were made on the same day, even though we indicated that we wanted to retain only the last 3.

Finally, there is one more significant change made to the MODIFY RECOVERY utility. Prior to V9, information was only deleted when copies were removed from SYSIBM.SYSCOPY. But as of V9, MODIFY RECOVERY will deletes SYSIBM.SYSLGRNX entries even if no SYSIBM.SYSCOPY records are deleted.

Why is this important? Well, some shops have migrated over to running BACKUP SYSTEM instead of individual image copies. In this case, there will be no individual image copies to remove in SYSIBM.SYSCOPY, but the SYSIBM.SYSLGRNX records will continue to grow. After migrating to V9 you can use MODIFY RECOVERY to trim the size of SYSIBM.SYSLGRNX which can improve performance for processes that need to access log range information.

TEMPLATE Switching [DB2 9 for z/OS]

Next up in this on-going series covering the new features and functionality of DB2 9 for z/OS we will tackle the improvements that have been made to the IBM DB2 utilities.

A nice new feature that impacts multiple utilities is TEMPLATE switching. For those not familiar with templating, TEMPLATE is a utility control statement that enables the allocation of data sets for a LISTDEF (LISTDEF is the way you control the list of database objects for a utility execution). With the TEMPLATE statement you essentially specify data set naming conventions and allocation information without using JCL DD statements.

OK, so what is TEMPLATE switching? What it enables you to do is to specify different characteristics for image copies of varying sizes. So, for example, you can create a different template for low and high volume image copies. Here is an example:

//SYSIN DD *
TEMPLATE low DSN &DB..&TS..IC.D&DA..T&TI.
  UNIT=DASD LIMIT(50 CYL,high)

TEMPLATE high DSN &DB..&TS..IC.D&DA..T&TI.

   UNIT=TAPE

COPY TABLESPACE MY.SMALLTS COPYDDN(low)

COPY TABLESPACE MY.LARGETS COPYDDN(low)

Note the new parameter named LIMIT. This is what controls when the TEMPLATE is switched. In this example we set the LIMIT for low volume at 50 cylinders. When this is reached the TEMPLATE will be switched to the high volume template. Of course, you have the flexibility to control the limit by specifying whatever number is appropriate for your site as well as specifying it in CYL, GB, or MB.

It is important to understand that DB2 can only switch the TEMPLATE once, so you cannot have more than two templates.

Template switching is available for image copies produced by COPY, COPYTOCOPY, MERGECOPY, LOAD, and REORG. And you can set up template switching for both the COPYDDN and RECOVERYDDN.

Optimistic Locking [DB2 9 for z/OS]

DB2 Version 9 improves support for coding optimistic locking techniques. What is optimistic locking? Sometimes referred to as optimistic concurrency control, optimistic locking is basically just what it sounds like. We are optimists and think that usually we will be the only ones with interest in the data. In other words, when optimistic locking is implemented you are assuming that most of the time there will be no other programs that are interested in the page of data that you are planning to modify.

Of course, even in the most optimistic world there will be exceptions, so optimistic locking does not assume that there will never be any concurrent processes that need to access your page(s). Basically, with optimistic locking you can improve performance by minimizing locking. So how do we do that?

When an application uses optimistic locking, locks are obtained immediately before a read operation and then released immediately. Update locks are obtained immediately before an update operation and held until the end of the transaction. Optimistic locking uses the RID (Record IDentifier) and a row change timestamp to test whether data has been changed by another transaction since the last read operation.

DB2 knows when a row was changed and so therefore he (I make DB2 masculine) can ensure data integrity even as he minimizes the duration of locks. With optimistic locking, DB2 releases the page (or row) locks immediately after a read operation. And if you are using row locks, DB2 releases the row lock after each FETCH, taking a new lock on a row only for a positioned update or a positioned delete.

Careful readers will have noticed that I talked about a “row change timestamp” but you may not have heard that expression before. DB2 V9 adds support for automatically generated timestamp columns and if you wish to implement optimistic locking you will need to create (or alter) your tables to have a row change timestamp column, defined as follows:

NOT NULL GENERATED ALWAYS
FOR EACH ROW ON UPDATE
AS ROW CHANGE TIMESTAMP

or

NOT NULL GENERATED BY DEFAULT
FOR EACH ROW ON UPDATE
AS ROW CHANGE TIMESTAMP

For tables having a row change timestamp column, DB2 will automatically populate and maintain the timestamp values for each row. Notice how the syntax is similar to the syntax used for other automatically generated DB2 values, such as sequences. DB2 will automatically generate the timestamp value for each row when the row is inserted, and modify the timestamp for each row when any column in that row is updated.

When you add a ROW CHANGE TIMESTAMP column to an existing table, the initial value for existing rows will not be immediately populated. Instead, DB2 places the table space in an advisory-REORG pending state. When you reorganize the table space, DB2 will generates the values for the ROW CHANGE TIMESTAMP column for all rows (and, of course, remove the advisory-REORG pending status).

Now that you have this new column you can use it as a condition for making an UPDATE and specify it in your WHERE clause. Let’s walk thru a couple of examples.

First of all, when a table contains a ROW CHANGE TIMESTAMP you can use it to find out when its rows were modified. Let’s use the following table as an example:

CREATE TABLE CUSTOMER
 (CUSTNO           CHAR(8) NOT NULL,
  CUST_INFOCHANGE  NOT NULL GENERATED ALWAYS
                   FOR EACH ROW ON UPDATE
                   AS ROW CHANGE TIMESTAMP,
  CUST_NAME        VARCHAR(50),
  CUST_ADDRESS     VARCHAR(100),
  CUST_CITY        CHAR(20),
  CUST_STATE       CHAR(2),
  CUST_ZIP         CHAR(9),
  CUST_PHONE       CHAR(10),

  PRIMARY KEY (CUSTNO)
 );

Now that the table is defined with the ROW CHANGE TIMESTAMP we can use it in our programs and queries to determine change information about the data. For example, if we want to find all of the customer rows that were changed in the past week (ie. the last 7 days) we could run the following query:

SELECT CUSTNO, CUST_NAME

FROM   CUSTOMER
WHERE ROW CHANGE TIMESTAMP FOR CUSTOMER <=
         CURRENT TIMESTAMP AND
      ROW CHANGE TIMESTAMP FOR CUSTOMER >=
         CURRENT TIMESTAMP - 7 DAYS;

But what would happen if you issued a statement like this against a table that was altered to include a ROW CHANGE TIMESTAMP? For example, if we created the CUSTOMER table as shown but without the CUST_INFOCHANGE column, populated the table with data, and then altered the table to include the CUST_INFOCHANGE column? In this case, DB2 will use the time the page was last modified. So the results will not be exactly correct because it would return all the rows on each page that qualifies (because at least one row on the page changed). This is why it is important to clear up the advisory REORG pending as soon as possible after adding the ROW CHANGE TIMESTAMP.

OK, this is all well and good, and you can probably see the value of having this automagically changing timestamp in some of your tables, but where is the optimistic locking part? Well, for programs that use updateable static scrollable cursors DB2 can use optimistic locking as long as the plan/package is bound specifying ISOLATION(CS). If you have this situation, DB2 will deploy optimistic locking to reduce the duration of locks between consecutive FETCH operations and between fetch operations and subsequent positioned UPDATE or DELETE operations.

Remember, though, DB2 cannot use optimistic concurrency control for dynamic scrollable cursors. With dynamic scrollable cursors, the most recently fetched row or page from the base table remains locked to maintain position for a positioned UPDATE or DELETE.

Without optimistic locking, the lock taken at the first FETCH is held until the next FETCH. The lock taken at the last FETCH is held until COMMIT, ROLLBACK, or the end of transaction.

With optimistic locking, the scenario changes significantly. When the application requests a FETCH to position the cursor on a row, DB2 locks that row, executes the FETCH and releases the lock. When the application requests a positioned UPDATE or DELETE on the row, DB2 locks the row and then re-evaluates the predicate to ensure that the row still qualifies for the result table.

So, when you move to DB2 9 for z/OS you should evaluate your applications looking for programs that could take advantage of optimistic locking – and then add the ROW CHANGE TIMESTAMP to the appropriate tables.

DB2-L Is Back Up & Running

In case you haven't noticed yet, the DB2 mailing list (DB2-L) is back up and running as of Monday, August 13, 2007.

However, the archives are not yet available, but it looks like they will be back up soon (with no data loss). So, welcome back DB2-L - - we all missed you!

DB2-L Is Down

Those of you who subscribe to the DB2 mailing list, also known as DB2-L, may have noticed that the usually steady stream of information, questions, and comments that used to pour into your in-box has dried up. Don't worry (well, you can worry a little bit, I s'pose), it is nothing you have done... DB2-L is not functional.

The company that hosts the list for IDUG moved the server two weeks ago and when they did they destroyed the disk drive. IDUG has been struggling to get everything rebuilt and back up since then, but it is taking longer than expected.

If you want to keep abreast of when it will be back online, status updates will be posted on IDUG's website...